|
T-Head Bolts & Eyebolts
DIN261, DIN444 / ASME B18.5 & ASME B18.15 specifications
T-head bolts: with externally threaded mechanical device 1/4" diameter or larger, with a rounded top surface and a flat bearing
surface.
Eyebolts: A forged bolt without welds, with a head in the form of an open or closed anchor ring. Bolt shall have a unified thread pitch.
Shoulder pattern eyebolts shall have an unthreaded shoulder below the anchor ring which is greater in diameter than the threaded shank.
Material & Hardness:
Carbon steel / Rockwell B70-100
Finish:
Zinc plated, Plain, Black oxidized, Dacrotized, HDG
Diameter: T-head bolts: 1/4" - 1" / Eyebolts: 1/4" - 2 1/2"
Length: T-head bolts: 3/8" - 12" / Eyebolts: 2" - 14"
 
|
